How to Install and Configure Multihomed ISC DHCP Server on Debian Linux - Part 2
Abstract: Configure DHCP Pools and Networks This is the sample created to hand out IP addresses to a network that is used for the creation of VMWare virtual pra
By default the server is assumed to NOT be an authority on the network. The rationale behind this is security. If someone unknowingly configures the DHCP server improperly or on a network they shouldn’t, it could cause serious connectivity issues. This line can also be used on a per network basis. This means that if the server is not the entire network’s DHCP server, the authoritative line can instead be used on a per network basis rather than in the global configuration as seen in the above screen-shot.
6. The next step is to configure all of the DHCP pools/networks that this server will manage. For brevities sake, this guide will only walk through one of the pools configured. The administrator will need to have gathered all of the necessary network information (ie domain name, network addresses, how many addresses can be handed out, etc).
For this pool the following information was obtained from the network administrator: network id of 172.27.60.0, subnet mask of 255.255.255.0 or a /24, the default gateway for the subnet is 172.27.60.1, and a broadcast address of 172.27.60.255.
This information is important to building the appropriate network stanza in the dhcpd.conf file. Without further ado, let’s open the configuration file again using a text editor and then add the new network to the server. This must be done with root/sudo!
# nano /etc/dhcp/dhcpd.confConfigure DHCP Pools and Networks
This is the sample created to hand out IP addresses to a network that is used for the creation of VMWare virtual practice servers. The first line indicates the network as well as the subnet mask for that network. Then inside the brackets are all the options that the DHCP server should provide to hosts on this network.
The first stanza, range 172.27.60.50 172.27.60.254;, is the range of dynamically assignable addresses that the DHCP server can hand out to hosts on this network. Notice that the first 49 addresses aren’t in the pool and can be assigned statically to hosts if needed.
The second stanza, option routers 172.27.60.1; , hands out the default gateway address for all hosts on this network.
The last stanza, option broadcast-address 172.27.60.255;, indicates what the network’s broadcast address. This address SHOULD NOT be a part of the range stanza as the broadcast address can’t be assigned to a host.
Some pointers, be sure to always end the option lines with a semi-colon (;) and always make sure each network created is enclosed in curly braces { }.
7. If there are more networks to create, continue creating them with their appropriate options and then save the text file. Once all configurations have been completed, the ISC-DHCP-Server process will need to be restarted in order to apply the new changes. This can be accomplished with the following command:
# service isc-dhcp-server restart
This will restart the DHCP service and then the administrator can check to see if the server is ready for DHCP requests several different ways. The easiest is to simply see if the server is listening on port 67 via the lsof command:
# lsof -i :67Check DHCP Listening Port
This output indicates that the DHCPD (DHCP Server daemon) is running and listening on port 67. Port 67 in this output was actually converted to ‘bootps‘ due to a port number mapping for port 67 in /etc/services file.
This is very common on most systems. At this point, the server should be ready for network connectivity and can be confirmed by connecting a machine to the network and having it request a DHCP address from the server.
Step 2: Testing Client Connectivity8. Most systems now-a-days are using Network Manager to maintain network connections and as such the device should be pre-configured to pull DHCP when the interface is active.
However on machines that aren’t using Network Manager, it may be necessary to manually attempt to pull a DHCP address. The next few steps will show how to do this as well as how to see whether the server is handing out addresses.
The ‘ifconfig‘ utility can be used to check an interface’s configuration. The machine used to test the DHCP server only has one network adapter and it is called ‘eth0‘.
# ifconfig eth0Check Network Interface IP Address
From this output, this machine currently doesn’t have an IPv4 address, great! Let’s instruct this machine to reach out to the DHCP server and request an address. This machine has the DHCP client utility known as ‘dhclient‘ installed. The DHCP client utility may very from system to system.
# dhclient eth0Request IP Address from DHCP
Now the 'inet addr:' field shows an IPv4 address that falls within the scope of what was configured for the 172.27.60.0 network. Also notice that the proper broadcast address was handed out as well as subnet mask for this network.
Things are looking promising but let’s check the server to see if it was actually the place where this machine received this new IP address. To accomplish this task, the server’s system log file will be consulted. While the entire log file may contain hundreds of thousands of entries, only a few are necessary for confirming that the server is working properly. Rather than using a full text editor, this time a utility known as ‘tail‘ will be used to only show the last few lines of the log file.
# tail /var/log/syslogCheck DHCP Logs
Voila! The server recorded handing out an address to this host (HRTDEBXENSRV). It is a safe assumption at this point that the server is working as intended and handing out the appropriate addresses for the networks that it is an authority. At this point the DHCP server is up and running. Configure the other networks, troubleshoot, and secure as necessary.
Enjoy the newly functioning ISC-DHCP-Server and tune in later for more Debian tutorials. In the not too distant future there will be an article on Bind9 and DDNS that will tie into this article.
Pages: 1 2
